AMDP Tip Dresser 

• New orange head design for improved milling adaptability. 
• The head can be oriented in different positions at 90º. (V or H) 
• Quick and easy assembly / disassembly of the cutter. 
• Cutting force: between 80 and 150 daN. 
• It has a chip collection tray. 
• Three-phase power supply (400V).

Combi AMDP  

• Electrode changer, allows you to change the electrodes in 15 seconds. 
• Warehouse of electrodes with a total load capacity of 13 units. 
• New orange head design for improved milling adaptability. 
• The head can be oriented in different positions at 90º. (V or H) 
• Quick and easy assembly and disassembly of the cutter. 
• Cutting force: between 80 and 150 daN. 
• It has a chip collection tray. 
• Three-phase power supply (400V). 

Electric Swing Arm ​

• New orange head design for improved milling adaptability. 
• The head can be oriented in different positions at 90º. (V or H) 
• Quick and easy assembly and disassembly of the cutter. 
• Easy installation of the milling machine thanks to the many adjustment possibilities.​ 
• Cutting force: between 80 and 150 daN.​ 
• It has a chip collection tray. ​ 
• The working position can be rotated 360º with an adjustment from 65º to 180º. 
• Three-phase power supply (400V). 

Automatic Tip Changer 

• Electrode changer, allows you to change the electrodes in 15 seconds. 
• Round electrode store with a total load capacity of 13 units
• Compact and easy to integrate into your production lines 
• The changer consists of 2 cap stores and an automatic extractor 
• It has a cap collection tray. 
• Three-phase power supply (400V). 

Fixed Tip Changer 

• Electrode changer, allows you to change the electrodes in 15 seconds. 
• Electrode warehouse with a total capacity of 13 electrodes, example F-16. 
• Compact and easy to integrate into robot gripper 
• Ideal for extracting electrodes in static clamps. 
• The changer consists of 2 cap stores and an automatic extractor 

AMDP Cutters

• AMDP cutters are manufactured using patented technology to provide vibration-free milling, exceptional electrode guidance and automatic chip ejection.​ 
• The internal blades can be replaced, extending the life of the cutter up to 3 times. 
• The AMDP range of milling cutters has materials such as: HSS, CARBIDE and MIRROR. 
• The design range is so wide that they can be adapted to any electrode. 
• It has special applications such as welding for ALUMINUM. 

Fluid control pump for robotic welding guns 

• Compact and easy to integrate unit 
• Hydraulic or pneumatic expansion cylinders 
• This unit controls the water cut-off by not counting on the presence of the electrode in the welding clamp. 
• It has a water suction mechanism which is activated when the electrode is no longer present in the robot clamp, preventing water leaks and drips.